FS K Rover extractors

View previous topic View next topic Go down

FS K Rover extractors

Post  dm on 2/6/2013, 8:47 am

I am offering a set of exhaust extractors for a K-Rover engine. They were originally on my MGF race car so would fit an Elise with the K Rover engine.

The pipe size at the head is 35 mm, primaries are very carefully matched length of 460 mm with 38mm OD. The secondaries are 45 mm OD and 550 mm long. There is no O2 plug in-situ. They are ceramic coated with the normal signs of heat. One of the secondary pipe bends has a two small dents which are small enough to be incidental rather than important.

They would be ideally suited to an engine with a fast road sports camshaft or standard camshaft where you wanted better mid range torque. They are a bit too small for a balls-out race engine (see other set for that).They were hand crafted by Hans Pederson at HP Performance in Blackburn, Melbourne. He knows what is required.

I am asking $500. If interested or you have any queries please contact me by PM. If you are not interested please feel free to remain silent.

I can send pics if requested (dhmottram@gmail.com)

dm

Posts : 57
Join date : 2010-08-27

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum